RB iconIP iconMPE iconRBAS iconRouse icon

Grundfos waterpomp CR15-17 + CR5-7 + etc

Hind km-ta

Hind kokkuleppel

FavoriteLemmik
shareJaga
Save searchOtsingu salvestamine
Trüki

INFO

Tooterühm
Veepumbad
Mark / mudel
Grundfos waterpomp CR15-17 + CR5-7 + etc
Tootmisaasta
2015
Asukoht
Pajottegem, Vlaams-Brabant
Riik
Belgia
Üldine hinne
1
2
3
4
5
Mascus ID
9E8F6322

DETAILID

Jõuallika tüüp
Elekter
Viimane ülevaatus
2025-03-14
Varasemaid omanikke
1
Pumba tüüp
Tsentrifugaalpump
Muu teave
or sale: Various models and types of water pumps: Vertical multistage centrifugal pump in good condition. (tested and approved) Several pieces and models in stock. Ready for use Water pump Brand: Grundfos Type: CR5-7 Flow: 5.8 M3/H (5.8 Cubic meters per hour) 1.1 Kilowatt electric motor. 220-230V or 400V Working pressure up to 16 Bar. Speed ​​for pump data: 2789 rpm Vertical multistage centrifugal pump with suction and discharge ports at the same level. The pump head and foot are made of cast iron - all other wet parts are made of stainless steel. -------------------------------------------- Water pump Brand: Grundfos Type: CR15-17 Flow / nominal flow: 17 M3/H (17 cubic meters per hour) 15 KW electric motor. 3 phase 400V Working pressure up to 25 Bar. Weight: 180 KG ----------------------- For sale: Water pump in good condition. (tested and approved) Several pieces and models in stock. Ready for use Year of construction 2015 Electric motor: 3 KW (Kilowatt) 380 / 400V Volt Andritz MP Multistage pump Pump description: The MP high pressure multistage pump is made entirely of cast parts. The rotor package is enclosed at both ends of the pump shaft, which ensures optimum distribution of the radial forces on the rotor package. The pump is very robustly developed and built for life. -------------------------------------- Water pump in good condition. (tested and approved) Multiple pieces and models in stock. Ready for use Electric motor: 2.2 KW (Kilowatt) 220-230 Volt or 380 / 400V Volt Flow: 5.2 M3/H 5.2 Cubic meters per hour. Multistage pump Pump description: The MP high pressure multistage pump is made entirely of cast parts. The rotor package is enclosed at both ends of the pump shaft, which ensures optimum distribution of the radial forces on the rotor package. The pump is very robustly developed and built for life.Näita veel

BVBA Vidts Machinery

Geraardsbergsesteenweg 22/A 1540 Herne Vlaams-Brabant Belgia
2
Aastad Mascuses
report adTeata kahtlasest kuulutusest