CAT 950 GC

Core Powertrain & Performance • Engine: Cat® C7.1, 7.01 L displacement (428 in³) • Net Power (ISO 9249): 151 kW (202 hp) @ 2,200 rpm • Max Gross Torque: 1,020 N·m (752 lbf·ft) @ 1,400 rpm • Emissions: U.S. EPA Tier 3 / EU Stage IIIA (meets China Nonroad Stage III, India Bharat Stage III, Brazil MAR-1) • Operating Weight: ~18,676 kg (41,174 lb) (config-dependent) • Breakout Force: 154 kN (34,623 lbf) Hydraulics & Work Tools • Implement System: Load-sensing piston pump ◦ Max Output: 256 L/min (68 gpm) @ 2,390 rpm ◦ Max Pressure: 27,900 kPa (4,047 psi) @ 50±1.5 L/min ◦ Cycle Times: Raise (carry) 6.1 s; Dump (max lift) 1.2 s; Total 10.1 s • Steering System: Piston pump • Bucket Capacity: 2.5–4.4 m³ (3.3–5.75 yd³) (general purpose) • Z-bar Linkage: Optimized penetration & high dump clearance Dimensions & Clearances • Wheelbase: 3,300 mm (10.83 ft) • Ground Clearance: 460 mm (1.5 ft) • Height to ROPS Top: 3,458 mm (11.33 ft) • Height to Hood Top: 2,673 mm (8.75 ft) • B-Pin Height (max lift): 4,188 mm (13.75 ft) • Lift Arm Clearance: 3,649 mm (12 ft) • Turning Radius (outer tire): 6,164 mm (20.3 ft) • Angles: Max lift tilt 60°; Max lift dump 52°; Carry tilt 45°; Ground tilt 40° Travel & Transmission • Transmission: 4F/3R power shift with kick-down & shift protection • Speeds (km/h / mph): ◦ F1/R1: 7.0 / 4.3 ◦ F2/R2: 12.5 / 7.8 ◦ F3/R3: 22.0 / 13.7 ◦ F4: 36.0 / 22.4 Fluid Capacities • Fuel Tank: 290 L (76.6 gal) • Hydraulic Tank: 112 L (29.6 gal) • Transmission: 45 L (11.9 gal) • Cooling System: 50 L (13.2 gal) • DEF Tank: 16 L (4.2 gal) Operator Environment • Cab: ROPS/FOPS II, pressurized, sound-suppressed • Controls: Pilot hydraulic (2 single-axis levers or 1 joystick) • AC: 10 vents, high-efficiency HVAC • Visibility: Wide flat windshield, floor-to-ceiling glass • Comfort: Adjustable steering column, cup holders, storage tray Standard Features • Wet-disc brakes, auto engine idle management (EIMS), load-sensing hydraulics • Rearview camera, 10 vents AC, S•O•S oil sampling, Product Link™ ready • Fusion™ quick coupler control, lift/bucket return-to-dig kickouts Optional Equipment • Limited-slip differentials, air suspension seat, cold-start aids (battery/ether) • 3rd hydraulic function (240 L/min max), LED work lights, ride control • Fender extensions, high-capacity 12V/15A port, toolbox Key Notes • All dimensions approximate (based on 23.5R25 L3 tires) • Static tipping load compliant to ISO 14397-1:2007 (±2% verification) • Consult local Cat dealer for regional spec variations & options All the machines in my factory we provide one year warranty，Our machine is high quality at the most competitive rates，Welcome to visit our company on site in Shanghai ,China