RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoKõik kategooriad
Avalda müügikuulutus

Toro STX26

Hind km-ta

Compnay LOGO
Images5
Toro STX26 Kännufreesid
Toro STX26 Kännufreesid
Toro STX26 Kännufreesid
FavoriteLemmik
shareJaga
Save searchOtsingu salvestamine
Trüki

INFO

Tooterühm
Kännufreesid
Mark / mudel
Toro STX26
Asukoht
Fontana, California
Riik
Ameerika Ühendriigid
Mascus ID
FF99E594

HIND

Vali valuuta

DETAILID

Inventarinumber
2021041
Toodetud
Ameerika Ühendriigid
Muu teave
Toro STX-26 Walk Behind Stump Grinder, Gas Engine, Intelli-Sweep System, Rubber Tracks, Hydraulic Driven Cutting Wheel, 19" Cutting Wheet with 12 Teeth, 12.5" Cutting Depth, Low 754 Hours, Excellent Condition! Track Design • Allows for zero turn capability • Provides a low center of gravity and large footprint • Increased stability on side hills • Eliminates tire ruts and flat tires • Operates in wet & soft ground conditions. Full Hydraulic Operation • Eliminate the labor of tightening or replacing expensive poly-chain® belts or clutches • No need to replace expensive cogged pulleys • No worry of customers engaging grinder head at full throttle • Eliminate shock loads to the engine by belts slipping or head stopping Traction Controls Easy-to-use control system offers smooth operation and fewer lever/nobs than conventional stump grinders. Two simple controls operate all traction and grinder functions. 1) Left/right traction control (forward, reverse, turn) 2) Sweep, lift/lower and engagement of grinder head. Offset Cutting Head • Provides operator with excellent visibility to stump • Allows full rotation perpendicular to machine Custom Trailer Easy to load on any trailer, including Toro's custom TRX trailer with an easy-to-use, built-in securing system. No need for straps or tie-downs. Tailgate design is safer and makes it easier to load than tilt-bed trailers. Trailer features highway rated tires. Specifications •Cutting Depth: 12.5" below grade •Cutting Wheel: 19" diameter to tooth; 3/4" thick, 12 green teeth •Cutting Height: 35" above grade •Head Swing: 47" Arc •Hydraulic Flow: 13.5 gpm hydraulic flow to head •Engine: Kawasaki 730V Twin Cylinder •Dimensions: 34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) H •Weight: 1200 lbs. (545 kg) •34" (86.4 cm) W x 78" (198.1 cm) L x 48" (121.9 cm) HNäita veel

ReQuip Corporation

16516 Washington Dr 92335 Fontana California Ameerika Ühendriigid
Saa teavitusi emaili teel
Näita kõiki ReQuip Corporation kuulutusi
report adTeata kahtlasest kuulutusest