RB iconIP iconMPE iconRBAS iconRouse icon
Mascus LogoKõik kategooriad
Avalda müügikuulutus

Tigges Maschinenbau (AT-Boretec) MT11 RockDrill XL

Hind km-ta

Images29
Tigges Maschinenbau (AT-Boretec) MT11 RockDrill XL Horisontaalsed puurmasinad
Tigges Maschinenbau (AT-Boretec) MT11 RockDrill XL Horisontaalsed puurmasinad
Tigges Maschinenbau (AT-Boretec) MT11 RockDrill XL Horisontaalsed puurmasinad
FavoriteLemmik
shareJaga
Save searchOtsingu salvestamine
Trüki

INFO

Tooterühm
Horisontaalsed puurmasinad
Mark / mudel
Tigges Maschinenbau (AT-Boretec) MT11 RockDrill XL
Tootmisaasta
2016
Töötunnid
4,621 h
Riik
Eesti
Mascus ID
4ECF8858

HIND

Vali valuuta

DETAILID

Seerianumber
2PK1127
Mootor
Tier IV
Jahutussüsteem
Vesi
Mootori võimsus
93 kW (126 hj)
Mootori tootja
Deutz
Veduki tüüp
Roomikutega
Kabiini tüüp
Kinnine
Transpordikaal
9,050 kg
Transpordimõõtmed (p x l x k)
6660 x 1760 x 2600 mm
Toodetud
Saksamaa
Muu teave
Sold to Estonia by local dealer in 2021 with 2300 hours on the clock. At the moment the drilll is located in Germany, Schmallenberg for servicing. Operating data: max. torque: 4.300 Nm Max. rotation speed: 220 /min. Max. retraction force: 135 kN Bentonite pump: FMC Type, , max. capacity: 265 ltr/min, max. pressure: 60 bar Drillrods: 3 m Engine: Deutz 93 kW / 126 PS, Tier IV Volume level: 75 dB (A) Chassis: Large Chassis /Rubber tracks Data: https://www.boretech.nl/producten/mt-11-serie/ NB! Data describes the capabilities of a new drill rig. Included in price: * used / practically new 36 complete dual rods have been used only 800m! * used Falcon F5+, Aurora 8,4" display and FTP5 sonde (ca 1600 workhours) * used Sitec M500D mixer system 5000 + 4000 liters tank * strongly used 22 old inner rods + used 45 old outer rods * used renovated AT-Boretec RockMaster drill head /sondehousing serviced in Schmallenberg, ONLY one shot 70m after renovation + stronly used tricone bit 5 5/8" * 2x used 5-wing 5 5/8“ PDC * used soft ground SHORTTRACK sondehousing with dirt bit 120mm + strongly used Rockbit IV Tri-Hawk 110mm * used LT4 hole opener body (sn HT W1544) with used 8" LTCI Type-7 cutters * new 10" and 12" LTCI Type-7 cutters for LT4 body * Kodiaq reamers: 140mm & 300mm NB! After engine servicing in Estonia (2023) by official Deutz representer the working hours counter restarted. The problem will be solved during drill maintenance in Germany. The happening is documented.Näita veel

HDD Estonia OÜ

Laki 6 10621 Tallinn Harjumaa Eesti
Jälgi seda müüjat
Näita kõiki HDD Estonia OÜ kuulutusi
report adTeata kahtlasest kuulutusest