agf 180 boom flail mower with trx valves
Hind km-ta
Lemmik
Jaga
Otsingu salvestamine
Trüki
INFO
Tooterühm
Niidukid
Mark / mudel
agf 180 boom flail mower with trx valves
Riik
Poola
Mascus ID
54CBD515
HIND
Vali valuuta
DETAILID
Inventarinumber
AGF180WZ TRX
Muu teave
AGF22-N rear-side flail mower
Super-heavy class flail (mulching) mower on the AGF boom. The flail mower model AGF, due to its massive construction and the heaviest hammers, is very well suited for professional municipal works. The hydraulically adjustable extension and inclination of the working module will be perfect for mowing roadsides, ditches and slopes.
Application:
clearing all kinds of waste
mowing roadsides, slopes and ditches
mowing green areas in cities
care of pastures, meadows, recreational areas, bushes for cleaning purposes
mowing green areas in parks
as a cleaning machine in orchards and nurseries
Advantages:
it can be easily used in urbanized areas because the number of flying stones and their impetus are very limited
when taking care of lawns, there is no need to collect mulched grass if this procedure is repeated quite often
it also copes with neglected terrain where there are more stones, branches and other obstacles
the cut green material quickly turns into humus, and the old grass does not grow back so quickly
has a double protection against damage to the gear: hammers bounce off a stable obstacle, belts on pulleys slip in case of too much resistance
the gearbox has a one-way clutch
simple construction ensures reliability and low repair costs
Technical data:
working width - 180cm
total width - 208cm
arm reach - 240cm (from the center of the tractor)
weight - 590 kg
minimum tractor power - 100 HP (the tractor must have the right weight)
maximum capacity - 1.8 ha/h
max speed - 10 km/h
number of V-belts - 4 pcs
mounted on the 3-point mount of the Cat-2 tractor
drive from the tractor's PTO shaft, 540 rpm
equipped with an angle gear with a clutch
cutting elements: 16 pieces of hammers with a weight of 1200 g per screw fi 16, max diameter of cut branches: Ø 80 mm
adjustable cutting height
the mower has both side shift and tilt angle, so it can also be used for mowing ditches (up to 60 degrees down), slopes and pre-hedges (up to 90 degrees up)
2-section hydraulics required in the tractor
In addition, our company:
provides a one-year warranty
we provide service and spare parts
for mowers with hydraulic control, we can prepare the necessary set that can be mounted on the tractor (to be agreed by phone)
Näita veel
Traktor.com.pl S.C. Wojciech i Miłosz Początek
Leszka Czarnego 8 35-615 Rzeszów Podkarpackie Poola
Jälgi seda müüjat
Teata kahtlasest kuulutusest